HZ/680 全自动软管灌装封尾机

HZ/680

全自动软管灌装封尾机

Plastic Tube Filling And Sealing Machine Key  Features

特点：

适用于塑料软管，复合软管及铝管包装。

供管→洗管→对标→灌装→加热→封尾（印码）→切尾→排管全部自动完成。组合式管座，切换简单，清洗方便，灌装量准确，调量简单。

功能：

适用于塑料软管，复合软管及铝管包装。供管→洗管→对标→灌装→加热→封尾（印码）→切尾→排管全部自动完成。组合式管座，切换简单、方便。切换一般只需10分钟。组合式灌装部，拆装简单，清洗方便。灌装量准确，调量简单。上升式灌装，防止产生气泡现象。切断式灌装头，防止拉丝现象。采用设计精密的加热头，热熔软管内壁后封尾。单面或双面印码皆可以。整机采用全不锈钢制造、清洁、卫生。

Features：

Tube feeding，cleaning，Mark-catching，filling，heating，sealing（coding），cutting can be done auto-matically.（PE＆Laminate tube）Change-over for different diameters of tube goes fast and simply within 10 minutes.Different types of filling nozzle for different materials in insure the precise volume and cleaning.Simple and easy filling amount adjustment.Filling nozzle is descended into tube during filling for debubbling.precise hot air nozzle and cooling system makes anti-leakage sealing.hopper is connected with sanitary clamp so that it is easy to clean，disassemble and assemble.date coding at both side of the tubes.

l 安全装置 safety device

l 超负荷保护装置 over-load protection device

l 无管不灌装 no tube，no filling

l 紧急停止 emergency stop device

l 安全门 safety door

l 无压缩空气无运作 no operation without compressed air

本机技术参数（Main Technical Data）

灌装范围filling range 5-250（充填杠体、活塞交换式）grams（filling cylinder/piston should be changed depends on filling amount）

灌装速度working capacity            30-60管/分钟tubes/min

管径diameter                        10-50MM

软管长度max                         230MMMax length:230mm（option：60tube）

灌装精度accuracy                    ±0.1-0.5％（以100g为基准）（based on 100grams）

加热器heater                        3000W

电源power                           220/280V/8KW/3相phase

气压compressed air                  4-5kgf/cm2 7001/min or more

料斗容量hopper capacity            40Liter（可根据用户要求制作changes can be made according to the specification）

外形尺寸dimensions                  850（宽W）*1250（长L）*2000(高H)MM

机器重量weight about                  800KG