自干陶瓷丝印水性油墨

1、适用范围：五金、金属、玻璃、陶瓷、电镀、大理石等材料丝印移印

2、特性：耐冲压、耐折弯、免烘烤自干、耐*、耐酸碱、耐*、耐腐蚀。

3、技术参数：

a.粘度：8000-12000CPS；

b.细度：5UM↓、光泽：60°↑；

c.干燥条件：自干24小时；

d.铅笔硬度：2H↑；

e.耐*：99%乙醇500g力来回超过30次；

f.耐磨：500g力来回超过30次；

g.过网性能：77T-145T网纱；

4、稀释剂的选择：稀释剂：S-3；使用前添加10%-15%的DB-01固化剂效果更好。

5、注意事项：

a.不可与其它油墨混用；

b.使用S-3慢干稀释剂稀释；

c.加过固化剂的油墨必须在3小时内用完；

d.密封保存，远离火源。

6、应急处理措施：

备注：由于材料及使用中的变数，可能是结果会有变化，以上数据仅供参考，使用前请自行测试。

1, the scope of application: no halogen ink can be printed, ABSS, acrylic, metal, electroplating, UV surface.

2, characteristics: medium and dry, ethanol, acid resistance.

3, technical parameters:

A. viscosity: 8000-12000CPS;

B.: 5UM:: gloss, fineness of 60 degrees up;

C. dry conditions: 24 hours from dry;

D. pencil hardness: 2H up;

E. resistance to alcohol: 99% ethanol 500g force back and forth more than 30 times;

F. wear: 500g force back and forth more than 30 times;

Gperformance: 77T-145T;

4, thinner choice: thinner: S-3; before using the 10%-15% to add DB-01 curing agent better effect.

5, matters needing attention:

A. and other printing ink;

B. using S-3 slow dry diluent dilution;

C. plus the curing agent of the ink must be used up within 3 hours;

D. sealed to save, away from the fire source.

6, emergency treatment measures:

A. such as dipped into the eye immediately clear water cleaning, serious medical treatment,

B. fire fighting measures: dry powder, foam fire extinguisher or sand.

] Note: due to the materials and the use of variablessibly is the change, the above data are for reference only, before using please self testing.