点击图片查看原图
Hawke防爆格兰系列（501/421）非铠，单密封系列
Hawke 501/421 | Ex d & Ex e | Cable Gland
Single Seal Cable Gland. ATEX/IECEx Group II Exd/Exe/ExnR/Ext approved for hazardous areas.
Hawke防爆格兰，Hawke防爆变径，Hawke防爆堵头，Hawke防爆接线盒，
Hawke产品广泛应用于石油石化和海洋钻井平台配套项目，产品通过ATEX和ABS等认证。
Hawke 501/421是一种经II组认证的单密封电缆密封套，适用于安装在1/21区和2/22区危险区域。
双认证ATEX/IECEx（以及更多）用于增强安全（Exe）、隔爆（Exd）、限制呼吸（ExnR）和防尘（Ext）保护概念。
用于非铠装弹性体和塑料绝缘电缆。该电缆密封套可用于编织电缆，其中编织层和外护套进入外壳，且符合60079-14的要求。
电缆外护套上的单弹性压缩Exd密封圆形电缆入口，防止电缆损坏，Hawke可提供公制或NPT入口螺纹形式
501/421/OS/M20 M20 (OS) Hawke 501/421 Flameproof ATEX Stuffing Gland
501/421/O/M20 M20 (O) Hawke 501/421 Flameproof ATEX Stuffing Gland
501/421/A/M20 M20 (A) Hawke 501/421 Flameproof ATEX Stuffing Gland
501/421/B/M25 M25 (B) Hawke 501/421 Flameproof ATEX Stuffing Gland
501/421/C/M32 M32 (C) Hawke 501/421 Flameproof ATEX Stuffing Gland
501/421/C2/M40 M40 (C2) Hawke 501/421 Flameproof ATEX Stuffing Gland
501/421/D/M50 M50 (D) Hawke 501/421 Flameproof ATEX Stuffing Gland
501/421/E/M63 M63 (E) Hawke 501/421 Flameproof ATEX Stuffing Gland
501/421/F/M75 M75 (F) Hawke 501/421 Flameproof ATEX Stuffing Gland
501/421/G/M80 M80 (G) Hawke 501/421 Flameproof ATEX Stuffing Gland
501/421/H/M90 M90 (H) Hawke 501/421 Flameproof ATEX Stuffing Gland
501/421/J/M100 M100 (J) Hawke 501/421 Flameproof ATEX Stuffing Gland
HAWKE 501/421 CABLE GLANDS
Hazardous Area Cable Glands from Hawke
Hawke 501/421 cable glands provide a reliable outer cable sheath seal specified to gland and terminate non-armoured elastomer and plastic insulated cables.
Hawke 501/421 cable glands are dual certified Exd and Exe and suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas, 3.2-91.6mm outside cable diameters.
When used in increased safety applications the Hawke cable gland can be used to terminate braided cables where the braid and the cable outer sheath enter into the electrical enclosure or junction box.
♦ Exdb IIC Gb, Exeb IIC Gb, Extb IIIC, Db Non-Aromoured Cables ATEX & IECEx Cable Gland
Hawke 501/421 cable gland is suitable for cable termination and installation in Zone 1 (21), Zone 2 (22) and Division 2 hazardous areas.
- Flameproof Exdb
- Increased Safety Exeb
- Dust Extb
- Dual Certified Cable Gland For Hazardous Areas ATEX – IECEx
HAWKE 501/421 CABLE GLAND TECHNICAL SPECIFICATION
- Hazardous Area Cable Gland Classification – Exdb IIC Gb, Exed IIC Gb, Extb IIIC Db
- Certificate No’s – baseefa06ATEX0056X and IECEx BAS 06.0013X
- Cable Gland Zone Location – Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC
- Construction and Test Standards – IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31
- Ingress Protection – IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X
- Deluge Protection – DTS01
- Operating Temperature Range -60°C to +100°C
CABLE GLAND SELECtION TABLE FOR HAWKE 501/421
| HAWKE CABLE GLAND SELECTION TABLE | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
Hawke Size Ref. |
Entry Thread Size |
Thread Length ‘H’ |
Cable Acceptance Details |
‘G’ Compressed Length |
Hexagon Dimensions | ||||||
| Outer Sheath ‘B’ | |||||||||||
| Metric | NPT * | Standard Seal | Alternative (S) Seal |
Across Flats |
Across Corners |
||||||
| Standard | Option | Min. | Max. | Min. | Max. | ||||||
| 2K | M16 | – | – | 15.0 | 3.2 | 8.0 | – | – | 23.5 | 19.0 | 21.2 |
| Os | M20 ‡ | ½” | – | 15.0 | 3.2 | 8.0 | – | – | 23.8 | 24.0 | 26.5 |
| O | M20 ‡ | ½” | – | 15.0 | 6.5 | 11.9 | – | – | 23.8 | 24.0 | 26.5 |
| A | M20 | ¾” | ½” | 15.0 | 10.0 | 14.3 | 9.0 | 13.4 | 24.8 | 30.0 | 32.5 |
| B | M25 | 1″ | ¾” | 15.0 | 13.0 | 20.2 | 9.5 | 15.4 | 25.8 | 36.0 | 39.5 |
| C | M32 | 1¼” | 1″ | 15.0 | 19.5 | 26.5 | 15.5 | 21.2 | 28.2 | 46.0 | 50.5 |
| C2 | M40 | 1½” | 1¼” | 15.0 | 25.0 | 32.5 | 22.0 | 28.0 | 29.5 | 55.0 | 60.6 |
| D | M50 | 2″ | 1½” | 15.0 | 31.5 | 44.4/42.3 † | 27.5 | 34.8 | 40.4 | 65.0 | 70.8 |
| E | M63 | 2½” | 2″ | 15.0 | 42.5 | 56.3/54.3 † | 39.0 | 46.5 | 38.2 | 80.0 | 88.0 |
| F | M75 | 3″ | 2½” | 15.0 | 54.5 | 68.2/65.3 † | 49.5 | 58.3 | 40.5 | 95.0 | 104.0 |
| G | M80 | 3½” | – | 20.0 | 67.0 | 73.0 | – | – | 41.0 | 106.4 | 115.0 |
| H | M90 | 3½” | – | 20.0 | 67.0 | 77.6 | – | – | 41.0 | 115.0 | 130.0 |
| J | M100 | 4″ | – | 20.0 | 75.0 | 91.6 | – | – | 41.0 | 127.0 | 142.0 |
All dimensions in millimetres (except*).
Os – F size metric entry threads are 1.5mm pitch as standard. For G size Cable Glands and above, a 2mm pitch is supplied as standard (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering.
† Smaller value is applicable when selecting reduced NPT entry option.
Sizes Os and O are available with an M16 thread size. For O size with an M16 thread, the maximum cable inner sheath diameter is 10.9mm.
CABLE GLAND MATERIAL & FINISH
Hawke 501/421 cable glands are manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.
PREPARING CABLE & GLAND FOR INSTALLING HAWKE 501/421
CABLE PREPARATION
Allow sufficient length of cable, measurement II, to suit the electrical equipment. If required, install cable gland shroud. Pass cable through the cable gland as shown. If the equipment has a threaded entry, Hawke recommend screwing the cable gland into the equipment to prevent cable twisting after Step B.
CABLE GLAND PREPARATION
Unless already screwed into the electrical equipment, hold the entry (2) in position with a cable gland spanner/wrench to prevent cable rotation and tighten the backnut (1) until resistance is felt between the cable and seal. Then proceed to turn the back nut through a further half to one full turn to complete the inner seal. Locate the shroud over the cable gland where required. To ease wiring inside the equipment strip the cable outer sheath of the cable as shown.
为什么选择Hawke电缆密封套？
所有Hawke电缆密封套都满足，并且在大多数情况下，超过了潜在危险区域使用产品的测试要求。
Hawke International电缆密封套拥有60多年在*恶劣环境下制造电缆终端产品的经验，并以安全性和可靠性而闻名，
提供当今**、**成本效益的电缆密封套产品。可以提供**的技术支持，为安装者和所有者提供安心。
60多年来，Hawke防爆格兰/Hawke防爆密封接头/Hawke防爆变径/防爆堵头/防爆呼吸阀等以其质量、安全和易于安装而闻名。
Hawke的新产品系列保留了客户熟悉和喜爱的功能，并添加了一些额外功能，使安装、检查和维护比以往任何时候都更容易。
下面了解Hawke的一些特殊功能，并索取目录以了解更多详细信息，可以联系上海颐品自动化科技有限公司产品经理。
Hawke专利紧固导向器：专利拧紧指南减少了压盖过度或过度拧紧的可能性。该指南现已作为标准集成到所有霍克压盖中！
Hawke具有NEC认证的完全可检查压盖，霍克的非金属、可完全检查的屏障压盖已获得NEC认证，这意味着它是美国**批准使用的非金属压盖。
新型压盖转换套件：Hawke为客户提供了将标准Exd 501/453/通用压盖转换为ICG/653/通用屏障压盖的选项，只需购买一个简单的套件。
该套件有两种形式，一种是两部分手动混合腻子，另一种是液体快速固化树脂，确保适用于任何情况。
Exd屏障压盖的三种替代解决方案：Hawke霍克是**一家提供三种密封选项的制造商！这意味着其他制造商无法比拟的独特优势。
防止水和灰尘渗透：防护等*包括IP66和IP67/68，IP66可承受高喷水压力，IP67/67可在产品浸入水中时进行测试。
Hawke还增加了IP69防护，确保我们的压盖能够承受高压蒸汽清洗。
Hawke International的一系列危险区域电缆密封套不断开发，以满足并超过客户的期望。Hawke公司可提供各种类型的电缆密封套，
如Coldflow兼容密封套、压缩密封套、屏障密封套和导管密封套，以确保我们能够满足客户的任何要求。我们**销的产品，通用压盖，
20年来一直是市场**！经ATEX和IECEx批准，Hawke所有的Exe和Exd防爆电缆密封套都经过认证，可用于需要防火、防爆和防雨
淋功能的区域。事实上，Hawke防爆格兰是如此强大，以至于我们甚至把一个通用格兰送到了太空！
portant;"> Hawke Cable glands
Hawke cable glands are designed to terminate power, control and instrumentation cables including hazardous area cable glands, ATEX approved and certified, for connecting cables into flameproof or increased safety equipment located in Zone 1 and Zone 2.
Cable glands provide a weather and gas-proof sealed mechanical connection between cables and electrical equipment preventing the cable from being pulled out or twisted and provide an earthing or grounding of the cable armour.
portant;"> HAWKE HAZARDOUS AREA CABLE GLANDS ATEX – ZONE 1 & ZONE 2
Exd/Exe hazardous area cable glands are certified to international classifications including IECEx and ATEX for safe installation and cable termination in potentially explosive atmosphere Zone 1 and Zone 2 locations.
Hawke are the market leading manufacturer of cable glands and connection solutions for hazardous (Exd | Exe) and industrial locations – we can support the specification and supply of cable glands to oil, gas and petrochemical projects.
Hawke 501/453 are universal cable glands suitable for both wire armoured and braided cables that must be terminated in hazardous areas Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC – extensively specified for glanding power, lighting, safety and instrumentation cable circuits.
The following cable glands are all dual certified (ATEX & IECEx) for use in Exd and Exe locations and suitable for cable termination in Zone 1 (21) and Zone 2 (22) hazardous areas.
Flameproof Exdb and Increased Safety Exeb (Dust Extb) Dual Certified glands from Hawke include – for further information review the product pages or contact us to discuss your cable gland requirements.
- 501/421 Cable Gland Unarmoured – outer cable sheath cable sealing
- 501/423 Cable Gland Unarmoured – flameproof seal to inner/outer cable sheath with IP seal on the outer sheath
- 501/453 Universal Cable Gland Wire Armoured Baided Steel Tape Armoured – indoor/outdoor hazardous areas
- ICG 623 Barrier Gland Unarmoured – Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC hazardous areas
- ICG 653 Barrier Gland Armoured – Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC hazardous areas
- 上海颐品自动化科技有限公司（Hawke防爆格兰）
