点击图片查看原图
RETZ/我们一直致力于流体控制和测控领域的持续创新，始于2005……(开关型,调节型)进口电动法兰球阀是由电动执行器与高性能球阀组成。适用于两位切断、调节的场合 (Cast steel, stainless steel) imported electric flange ball valve is composed of electric actuator and high-performance ball valve. Applicable to two-position cut-off and adjustment occasions
根据结构形式可分为：电动软密封球阀和电动硬密封球阀两类。软密封球阀主要适用于温度低于250度以内的介质。硬密封球阀主要适用于250度以上的介质 According to the structure, it can be divided into two types: electric soft seal ball valve and electric hard seal ball valve. Soft seal ball valve is mainly applicable to the medium with temperature below 250 ℃. Hard seal ball valve is mainly applicable to medium above 250 ℃
电动法兰球阀密封性能优良、流通能力大、装卸维护方便、流阻小、密封可靠，甚至切断。电动法兰球阀体积小、重量轻、推力大、功能强、伺服放大器内装、操作方便、可靠性高，球阀与执行器采用直连方式，内置伺服系统，无须另配伺服放大器，输入输出信号4-20mA及220VAC电源即可控制运转。电动法兰球阀具有连线简单、结构紧凑、动作稳定可靠等优点 The electric flanged ball valve has excellent sealing performance, large flow capacity, convenient handling and maintenance, small flow resistance, reliable sealing and even cut-off. Electric flanged ball valve has small size, light weight, large thrust, strong function, built-in servo amplifier, convenient operation and high reliability. The ball valve and actuator are directly connected, with built-in servo system, without additional servo amplifier. The input and output signals can be controlled by 4-20mA and 220VAC power supply. Electric flange ball valve has the advantages of simple connection, compact structure, stable and reliable action, etc
产品特点 Product features
（1）流体阻力小，即使是缩径球阀，其流体阻力也相当小 The fluid resistance is small, even for the reduced diameter ball valve, its fluid resistance is also quite small
（2）止推轴承减小阀杆摩擦力矩，可使阀杆长期操作平衡灵活 The thrust bearing reduces the friction torque of the valve rod, which can make the valve rod balance and flexible for long-term operation
（3）阀座密封性能好，采用聚四氟乙烯等材料制成的密封圈，结构易于密封，而且球阀的阀封能力随着介质压力的增设而增大 The sealing performance of the valve seat is good. The sealing ring made of polytetrafluoroethylene and other materials is easy to seal, and the sealing capacity of the ball valve increases with the increase of the medium pressure
（4）阀杆密封可靠，由于阀杆只作旋转运动而不做升降运动，阀杆的填料密封不易破坏，且密封能力随着介质的压力增设而增大 The valve rod is sealed reliably. Because the valve rod only rotates without lifting, the packing seal of the valve rod is not easy to be damaged, and the sealing capacity increases with the increase of medium pressure
（5）由于聚四氟乙烯等材料具有良好的自润滑性，与球体的摩擦损失小，帮球阀的使用寿命长 Due to the good self-lubrication of PTFE and other materials, the friction loss with the ball is small, and the service life of the ball valve is long
（6）下装式阀杆和阀杆头部凸阶防止阀杆喷出，如火灾造成阀杆密封破坏，凸阶与阀体间还可形成金属接触，确保阀杆密封 The bottom-mounted valve stem and the convex step of the valve stem head prevent the valve stem from spraying out. If the valve stem seal is damaged by fire, the metal contact between the convex step and the valve body can also be formed to ensure the valve stem seal
进口电动法兰球阀主要零件材料 Material of main parts
|
零件名称 |
材料 |
|||
|
阀体、阀盖 |
WCB |
304(CF8) |
316(CF8M) |
316L(CF3M) |
|
球体 |
2Cr13+氮化处理 |
304 |
316 |
316L |
|
阀杆 |
2Cr13 |
304 |
316 |
316L |
|
阀座密封圈 |
PTFE、碳素纤维＋PTFE、对位聚苯 |
|||
|
填料 |
V型PTFE、柔性石墨 |
|||
技术参数及性能 Technical parameters and performance
|
公称通径DN(mm) |
15 |
20 |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
|
额定流量系数KV |
21 |
38 |
72 |
112 |
170 |
273 |
384 |
512 |
940 |
1452 |
2222 |
3589 |
|
公称压力(MPa) |
PN1.6、2.5、4.0、6.4 MPa；ANSI 150、300LB |
|||||||||||
|
允许压差(MPa) |
≤公称压力 |
|||||||||||
|
阀体形式 |
两段式铸造球阀 |
|||||||||||
|
连接形式 |
法兰式 |
|||||||||||
|
阀芯形式 |
"O"型球形阀芯 |
|||||||||||
|
密封填料 |
V型聚四氟乙烯填料、柔性石墨填料等 |
|||||||||||
|
流量特性 |
近似快开型 |
|||||||||||
|
动作范围 |
0～90° |
|||||||||||
|
泄露量Q |
小于额定KV0.01% |
|||||||||||
|
基本误差 |
±1% |
|||||||||||
|
回差 |
±1% |
|||||||||||
|
死区 |
≤1%(可调) |
|||||||||||
|
可调范围 |
250：1 |
350：1 |
||||||||||
|
配置执行机构 |
角行程电动执行机构 |
|||||||||||
|
控制方式 |
开关到位灯(开关两位控制)、无源触点信号、1/5K电位计、智能调节(4～20mA模拟量信号控制) |
|||||||||||
进口电动法兰球阀执行器技术参数 Technical parameters of actuator
|
电源电压 |
AC220/380V，50/60Hz |
|
输出力矩 |
50N·M～2000N·M |
|
动作范围 |
0～90° 0～360° |
|
动作时间 |
15秒/30秒/60秒 |
|
保护装置 |
过热保护 |
|
环境温度 |
-30°～60° |
|
手动操作 |
同附带手柄操作 |
|
限位 |
电气、机械二重限位 |
|
防护等* |
相当于IP-65 |
|
防爆等* |
ExdII BT4；特殊要求可定制ExdII BT6 |
|
位置测量 |
可选装开关或电位计 |
|
驱动电机 |
8W/E |
|
进线接口 |
PE1/2〞进线线锁 |
富林克致力于作为流体控制专家，负责中国地区RETZ产品的营销管理和服务，从而创造价值的企业，RETZ以“坚持更好的品质”为根本，以“持续实现具有创造性、*品质产品和服务的企业价值，为当今社会的繁荣作出贡献”为企业理念
